Introduction To Laser Cutting Machine

The laser cutting machine focuses the laser light emitted from the laser device into a high power density laser beam through the optical path system. The laser beam irradiates the surface of the workpiece to make the workpiece reach the melting point or boiling point, and at the same time, the high-pressure gas coaxial with the beam blows away the molten or vaporized metal.
With the movement of the relative position of the beam and the workpiece, the material will eventually form a slit, so as to achieve the purpose of cutting.
Laser cutting process replaces the traditional mechanical knife with an invisible beam. It has the characteristics of high precision, fast cutting, not limited to cutting patterns, automatic typesetting saves materials, smooth incision, and low processing cost. It will gradually improve or replace it. Traditional metal cutting process equipment. The mechanical part of the laser cutter head has no contact with the workpiece, and will not scratch the surface of the workpiece during work; the laser cutting speed is fast, the incision is smooth and flat, and generally no subsequent processing is required; the cutting heat-affected zone is small, the deformation of the plate is small, and the kerf is narrow ( 0.1mm~0.3mm); the incision has no mechanical stress, no shearing burrs; high processing precision, good repeatability, no damage to the material surface; CNC programming, can process any plan, and can cut the whole board with a large format without Opening molds is economical and time-saving.